R-R Mode - EDAN SE-601 Series User Manual

5) For SE-601B/C, press Tab or Shift + Tab to move the cursor to the Rhythm
Lead1/2/3 item, and then press F1 or F2 to select a lead.
For SE-601A, press F1, F2, Tab or Shift + Tab to move the cursor to the Rhythm
Lead1/2/3 item, and then press F3 or F4 to select a lead.
6) For SE-601B/C, press Tab or Shift + Tab to move the cursor to the Lead Sequence
item, and then press F1 or F2 to select a sequence.
For SE-601A, press F1, F2, Tab or Shift + Tab to move the cursor to the Lead
Sequence item, and then press F3 or F4 to select a sequence.
7) Press Enter to confirm.
After setup, press Esc or the function key F5 below
interface.
3. Press the START/STOP key and the hint information Sampling will be displayed on the
LCD screen, and the sampling time will be counted. When the sampling time reaches 60s
in the Single Lead style or 20s in the Three Lead style, it begins to print an ECG report.
4. It will stop automatically after printing a complete report of rhythm-lead ECG waveforms.
Or press the START/STOP key again to stop printing the report.

7.4 R-R Mode

Operation Method:
1. When the main interface1 is displayed, press the function key F5 below
the main interface2. Press the function key F1 below Setup to display the System Setup
interface and the cursor is on Work Mode. Press Enter to open the Work Mode Setup
interface.
1) For SE-601B/C, press F1 or F2 to select R-R. For SE-601A, press F3 or F4 to select
SE-601 Series Electrocardiograph User Manual
SE-601B / SE-601C Lead Setup Interface
SE-601A Lead Setup Interface
- 45 -
to exit the System Setup
to open