Selecting Id Hint; Selecting Gender/Height/Weight/Bp/Race/Medication/Ward No/Doctor/Technician; Specifying H/W Unit - EDAN SE-601 Series User Manual

SE-601 Series Electrocardiograph User Manual
Question interface, and then press F1 or F2 to select a mode.
For SE-601A, press F1, F2, Tab or Shift + Tab to move the cursor to the ID Mode item on the
Patient Question interface, and then press F3 or F4 to select a mode.
You can set ID Mode to Auto, Time or Manu.
When ID Mode is set to Auto, the patient ID can be automatically generated. The patient ID
range is 0~1999, 999, 999.
When ID Mode is set to Time, the patient ID can be automatically generated according to the
time that you press the START/STOP key to print an ECG report.
When ID Mode is set to Manu, you can enter the patient ID manually on the Patient
Information interface.

9.7.2 Selecting ID Hint

For SE-601B/C, press Tab or Shift + Tab to move the cursor to the ID Hint item on the Patient
Question interface, and then press F1 or F2 to select On or Off.
For SE-601A, press F1, F2, Tab or Shift + Tab to move the cursor to the ID Hint item on the
Patient Question interface, and then press F3 or F4 to select On or Off.
In the AUTO or RHYT mode, when ID Mode is set to Manu and ID Hint is set to On, if you do
not input the patient ID, the hint will pop up to remind you to input the patient ID when you press
the START/STOP key.
9.7.3 Selecting Gender/Height/Weight/BP/Race/Medication/Ward
NO/Doctor/Technician
For SE-601B/C, press Tab or Shift + Tab to move the cursor to an item on the Patient Question
interface, and then press F1 or F2 to select On or Off.
For SE-601A, press F1, F2, Tab or Shift + Tab to move the cursor to an item on the Patient
Question interface, and then press F3 or F4 to select On or Off.
When Gender, Height, Weight, BP, Race, Medication, Ward NO, Doctor or Technician is set
to On, the items will be displayed in the Patient Information window.
When Gender, Height, Weight, BP, Race, Medication, Ward NO, Doctor or Technician is set
to Off, these items will not be displayed in the Patient Information window.

9.7.4 Specifying H/W Unit

For SE-601B/C, press Tab or Shift + Tab to move the cursor to the H/W Unit item on the
Patient Question interface, and then press F1 or F2 to select cm/kg or inch/lb..
For SE-601A, press F1, F2, Tab or Shift + Tab to move the cursor to the H/W Unit item on the
Patient Question interface, and then press F3 or F4 to select cm/kg or inch/lb..
- 87 -