Changing Trace Width; Changing Paper Style; Changing The Language - EDAN F15 Series Service Manual

F15 Series Fetal & Maternal Monitor Service Manual
192.168.1.X.
14 Select OK in the Network Setup menu.
15 Select OK in the System Setup menu and then restart the monitor.

4.11 Changing Trace Width

In order to differentiate the traces clearly, you may assign different widths for different traces.
1 Open the System Setup menu.
2 Select Recorder Configuration.
3 Select FHR1.
4 Select a number from 1, 2, 3 and 4. The width of the trace increases by degrees from 1 to
4.
5 Set width of FHR2, FHR3, AFM, TOCO, HR and SpO
6 Select OK in the Recorder Configuration menu.
7 Select OK in the System Setup menu.

4.12 Changing Paper Style

The paper style determines the range of FHR trace background pane bar. Observe the recorder
paper that the user has ordered, 30 ~ 240 is USA style; 50 ~ 210 is International style.
1 Open the System Setup menu.
2 Select Recorder Configuration.
3 Select the pane next to Paper Style.
4 Select the required style from USA and International.
5 Select OK in the Recorder Configuration menu.
6 Select OK in the System Setup menu.
To avoid inconsistency between FHR traces on the recorder paper and those on the
screen, the paper style must comply with the style of the recorder paper being used.

4.13 Changing the Language

The software supports several languages.
1 Open the System Setup menu.
2 Select Language.
3 Select the required language.
4 Select OK.
traces in the same way.
2
CAUTION
- 16 -
System Configuration