Editing Patient Information - EDAN SE-601 Series User Manual

Notes:
1. If necessary, you can press Esc to cancel the operation during the copying course.
2. Please insert the U disk or the SD card reader that the manufacturer recommends.
3. Only the U disk with the capacity of 1GB or below is supported. Please set the format
to FAT when formatting the U disk.
4. In order to protect the U disk, you should insert the U disk after power-on, and pull out
the U disk before power-off.

8.4 Editing Patient Information

When the main interface1 is displayed, press the function key F5 below
main interface2. Press the function key F2 below File to open the File Manage interface1.
Press F1, F2, Shift + F1 or Shift + F2 to highlight a file, and then press the function key F4
below Select to select the file and open the File Manage interface3. Press the function key F1
below Edit to open the Patient Information window.
You can edit the patient information in the Patient Information window.
1. Press Tab or Shift + Tab to move the cursor to a textbox, and then enter information.
2. Press Tab or Shift + Tab to move the cursor to an item, and then press F1 or F2 to select an
option.
3. For SE-601A, press Tab or Shift + Tab to move the cursor to the Next or Prev button, and
then press Enter to turn the page.
SE-601 Series Electrocardiograph User Manual
SE-601B/C Patient Information Window
SE-601A Patient Information Window
- 64 -
to open the