Inputting Sampling Time; Filter Setup - EDAN SE-601 Series User Manual

SE-601 Series Electrocardiograph User Manual
When Record Sequence is set to Sequential, the lead group is printed one by one in a certain
sequence. The start time of a lead group is just the end time of the previous lead group, as the
following figure shows.
When Record Sequence is set to Simultaneous, all leads are printed simultaneously. The start
time of each group is the same. All the start time is 0s, as the following figure shows.

9.1.7 Inputting Sampling Time

Press Tab or Shift + Tab to move the cursor to the Sample Time textbox on the Work Mode
Setup interface, and then enter the sampling time. The range of the sampling time is 10-24s.
The sampling time is only valid in the auto style of 6×2 adjust.

9.2 Filter Setup

Press F1, F2, F3, F4, Tab or Shift + Tab to move the cursor to Filter on the System Setup
interface, and then press Enter to open the Filter Setup interface.
On the Filter Setup interface, you can set AC Filter, EMG Filter, DFT Filter, and Lowpass
Filter.
- 73 -