Specifying Recording Device; Selecting Paper Marker - EDAN SE-601 Series User Manual

For SE-601A, if you press Esc to exit the Record Setup interface after setup, a hint will pop up
to prompt you to save these modifications.
Note: The Patient Info, Template, Measure, Minnesota Code, Analysis, and Position
Marker items are valid only in the AUTO mode.

9.3.1 Specifying Recording Device

For SE-601B/C, press Tab or Shift + Tab to move the cursor to the Record Device item on the
Record Setup interface. Press F1 or F2 to select an option.
For SE-601A, press F1, F2, Tab or Shift + Tab to move the cursor to the Record Device item on
the Record Setup interface. Press F3 or F4 to select an option.
You can set Record Device to Thermal, HP2468, HP2568, HP4368 or HP2015.
HP2468, HP2568, HP4368 and HP2015 are the types of the USB printer, when HP2468,
HP2568, HP4368 or HP2015 is selected, you should connect the corresponding USB printer to
USB socket 2 of the electrocardiograph with a special cable. Press the START/STOP key to print
ECG reports by using the USB printer.
Notes:
1. During the USB printing course，pressing the START/STOP key again can not stop
printing ECG reports.
2. USB printing only works in the auto real-time sampling mode, auto pre-sampling mode,
and auto trigger sampling mode. It also supports copy printing, and file printing in the
AUTO mode on the File Manage interface.
3. Make sure that paper is installed in the USB printer before printing. Error may occur if
no paper is loaded in the USB printer.
:
CAUTION
1. In order to protect the USB printer, you should connect the USB printer after power-on,
and disconnect the USB printer before power-off.
2. It is forbidden to frequently connect or disconnect the U disk or the USB printer after
power-on.

9.3.2 Selecting Paper Marker

For SE-601B/C, press Tab or Shift + Tab to move the cursor to the Paper Marker item on the
Record Setup interface, and then press F1 or F2 to select an option.
For SE-601A, press F1, F2, Tab or Shift + Tab to move the cursor to the Paper Marker item on
the Record Setup interface, and then press F3 or F4 to select an option.
Paper Marker is used to identify the paper style.
When the paper with black markers on the bottom is used and Paper Marker is set to Style1 or
Style2,
SE-601 Series Electrocardiograph User Manual
- 76 -