Chapter 2 Introduction; Top Panel - EDAN SE-601 Series User Manual

Chapter 2 Introduction

The 6-channel electrocardiograph gathers ECG signals of 12 leads simultaneously. It displays
the operation menu, ECG parameters as well as electrocardiograms.
The 6-channel ECG waves can be viewed on the LCD screen and printed out by using a
high-quality thermal recorder.
The manual, auto, rhythm or R-R mode can be chosen freely.
SE-601 can be powered by the mains supply or a built-in rechargeable lithium battery.
With a high resolution thermal recorder, a 32-bit processor and a large-capacity memorizer, the
6-channel electrocardiograph has advanced performance and high reliability. The compact size
makes it suitable for clinic and hospital uses.
The 6-channel electrocardiograph has three models: SE-601A, SE-601B and SE-601C.
SE-601A adopts 192×64 dot single color LCD screen; SE-601B adopts 320×240 dot single
color LCD screen; SE-601C adopts 640×480 dot multicolor TFT LCD screen.
Configuration: main unit, power cord, patient cable, chest electrodes, limb electrodes,
disposable electrodes, alligator clips, thermal recorder paper, fuses and lithium
battery.
WARNING
1. This equipment is intended for use on adult and pediatric patients only.
2. This equipment is not designed for internal use or direct cardiac application.
3. The results given by the equipment should be examined based on the overall
clinical condition of the patient, and they can not substitute for regular checking.

2.1 Top Panel

Recorder
Indicators
From left to right on the
top panel: A, B, C.
SE-601 Series Electrocardiograph User Manual
:
Figure 2-1 SE-601A
- 8 -
LCD Screen
Keyboard