Snom M100 KLE Administrator And Provisioning Manual page 98

Setting
Mode
Bootup Check
Schedule Check: Disable
Schedule Check: Interval
Schedule Check:
Days of the Week
Start Hour
End Hour
Use encryption for
configuration file
Passphrase
Using the WebUI
M100 KLE Administrator and Provisioning Manual
Description
Sets which files for which the M100 KLE checks. It can
check for configuration files, firmware update files (from the
URL entered on the Firmware Server Settings page), or
both.
Note: When checking for both configuration and firmware
files, the firmware URL can be within the config file. This
firmware URL takes take precedence over the URL on the
Firmware Server Settings page. It will also update the URL
on the Firmware Server Settings page. This allows you to
change the firmware URL automatically.
Sets the M100 KLE to check the provisioning URL for new
configuration and/or firmware files upon bootup. The
update is applied as part of the reboot process.
When selected, disables regularly scheduled file checking.
Sets an interval for checking for updates. After selecting
Interval, enter the interval in minutes between update
checks.
Select to enable weekly checking for updates on one or
more days. After selecting Days of the Week, select the
day(s) on which the M100 KLE checks for updates.
Select the hour of the day on which the M100 KLE checks
for updates.
Select the hour of the day on which the M100 KLE stops
checking for updates.
Enables an AES-encrypted configuration file to be
decrypted before being applied to the M100 KLE. Select if
the configuration file has been secured using AES
encryption. See
"Securing configuration files with AES
encryption" on page 115.
If the configuration file has been secured using AES
encryption, enter the 16-bit key. See
configuration files with AES encryption" on page
98
"Securing
115.
Back to Contents