Snom M100 KLE Administrator And Provisioning Manual page 127

Values:
Setting:
Description:
Values:
Setting:
Description:
Values:
Setting:
Description:
Values:
Setting:
Description:
Values:
Setting:
Description:
Values:
Configuration File Parameter Guide
M100 KLE Administrator and Provisioning Manual
from, pai, rpid
sip_account.x.cid_src_priority.2
Sets the second priority of the caller ID source to be displayed on the
incoming call screen.
none, from, pai, rpid
sip_account.x.cid_src_priority.3
Sets the third priority of the caller ID source to be displayed on the
incoming call screen.
none, from, pai, rpid
sip_account.x.call_rejection_response_code
Select the response code for call rejection. This code applies to the
following call rejection cases:
User presses
Reject

DND is enabled

Phone rejects a second incoming call with Call Waiting disabled

Phone rejects an anonymous call with Anonymous Call Rejection

enabled
Phone rejects call when the maximum number of calls is reached

480, 486, 603
sip_account.x.dtmf_payload_type
Set the configurable RTP payload type for in-call DTMF.
96-127
sip_account.x.use_register_route_header
Use Route header for REGISTER
0 (disabled), 1 (enabled)
127
Default: pai
Default: rpid
Default: from
for an incoming call
Default: 486
Default: 101
Default: 1
Back to Contents