Hs_Settings" Module: Handset Settings; General Configuration File Settings - Snom M100 KLE Administrator And Provisioning Manual

"hs_settings" Module: Handset Settings

The Handset Settings allow you to configure account assignments and names for the
cordless handsets that are registered to the base station. For more information on
registering cordless handsets, see the M100 KLE/M10 KLE User Guide.

General configuration file settings

Setting:
Description:
Values:
Setting:
Description:
Values:
Setting:
Description:
Values:
Setting:
Description:
Values:
Configuration File Parameter Guide
M100 KLE Administrator and Provisioning Manual
hs_settings.autoreg_enable
Enable/disable HS auto registration
If enabled, handset with IPEI matching with hs_settings.x.ipei

will be allowed to register without going through manual DECT
registration
Otherwise, handset have to be registered through manual DECT

registration
See also parameters hs_settings.x.ipei,

system.x.registered_ipei
0 (disabled), 1 (enabled)
hs_settings.handset_us_pin_code
Sets the new 4-digit PIN for handset registration/deregistration.
4-digit number
hs_settings.keyline.y
Assigns accounts to KeyLine numbers (where y ranges from 1-12
KeyLine numbers).
For more information, see
0-8
hs_settings.x.pfk.line1.feature
Assign a feature to the L1 line key.
unassigned, keyline, line,
call list, dir, call log, redial,
messages, dnd, cfwd all,
cfwd busy, cfwd no answer
133
Default: 0
Default: 1592
"KeyLine Assignments" on page
Default: 1 (where y = 1-6)
0 (where y = 7-12)
Default: keyline
57.
Back to Contents