Snom M100 KLE Administrator And Provisioning Manual page 146

Setting:
Description:
Values:
Setting:
Description:
Values:
Setting:
Description:
Values:
Setting:
Description:
Values:
Setting:
Description:
Values:
Setting:
Description:
Values:
Configuration File Parameter Guide
M100 KLE Administrator and Provisioning Manual
provisioning.bootup_check_enable
Enables or disables bootup check for configuration and firmware files.
0 (disabled), 1 (enabled)
provisioning.schedule_mode
Sets the type of schedule check for configuration and firmware files.
disable, interval, weekday Default:
provisioning.resync_time
Sets the interval (in minutes) between checks for new firmware and/or
configuration files.
0–65535
provisioning.weekdays
Sets the day(s) when the device checks for new firmware and/or
configuration files. Enter a comma-delimited list of weekdays from 0
(Sunday) to 6 (Saturday). For example, 5,6,0 means the provisioning
check will be performed on Friday, Saturday and Sunday.
0–6
provisioning.weekdays_start_hr
Sets the hour when the device checks for new firmware and/or
configuration files.
0–23
provisioning.weekdays_end_hr
Sets the hour when the device stops checking for new firmware and/or
configuration files.
0–23
146
Default: 1
disable
Default: 0 (OFF)
Default: Blank
Default: 0
Default: 0
Back to Contents