Snom M100 KLE Administrator And Provisioning Manual page 58

M100 KLE Administrator and Provisioning Manual
Web UI:
Select SYSTEM > Handset Settings > Programmable keys. In the Select Handset
setting, select the handset you want to configure.
Under Line Key Settings, assign the KeyLine numbers that match the KeyLine numbers
you configured in the WebUI KeyLine Assignments.
The default configuration to enable a Key System experience is:
Key: Line Key 1, Type: Keyline, Value: 1
Key: Line Key 2, Type: Keyline, Value: 2
Key: Line Key 3, Type: Keyline, Value: 3
Key: Line Key 4, Type: Keyline, Value: 4
For more information, see the "KeyLine*" setting on
page 62.
Phone User Interface:
On the handset/deskset, select MENU > User Settings > Progrm'able key > Line key
.
For each line key (L1 to L4), assign the KeyLine number that matches the KeyLine numbers
you configured in the WebUI KeyLine Assignments.
The default configuration to enable a Key System experience is:
L1 Type: KeyLine, L1 Value: Index 1
L2 Type: KeyLine, L2 Value: Index 2
L3 Type: KeyLine, L3 Value: Index 3
L4 Type: KeyLine, L4 Value: Index 4
For more information about configuring the line keys (L1 to L4), see
"Configuring the programmable keys" in the M100 KLE/M10 KLE User Guide.
Configuration parameters:
Import the following parameter values into the M100 KLE with the KeyLine numbers that
match the KeyLine numbers you configured in the WebUI KeyLine Assignments. Replace
the "x" in the parameter name with the handset number you want to configure.
The default configuration to enable a Key System experience is:
Using the WebUI 58
Back to Contents