"system" Module: System settings
The System settings enables you to configure DECT related settings for the M100 KLE
4-Line base station.
General configuration file settings
Setting:
Description:
Values:
Setting:
Description:
Values:
MAC-specific configuration file settings
Setting:
Description:
Values:
Configuration File Parameter Guide
M100 KLE Administrator and Provisioning Manual
system.repeater_mode_enable
Enables a repeater (such as the VSP605 Range Extender) to be
registered to the M100 KLE 4-Line base station.
0 (disabled), 1 (enabled)
system.eco
Enables or disables ECO mode.
0 (disabled), 1 (enabled)
system.x.registered_ipei
Read-only parameters indicating handset registration status (for both
auto & manual registration) (where x ranges from 1-10).
[blank] if no handset is registered to the slot
See also parameters hs_settings.autoreg_enable,
hs_settings.x.ipei.
N/A
139
Default:
0
Default:
0
Default:
N/A
Back to Contents