Snom M100 KLE Administrator And Provisioning Manual page 147

Setting:
Description:
Values:
Setting:
Description:
Values:
Setting:
Description:
Values:
Setting:
Description:
Values:
Setting:
Description:
Values:
Setting:
Description:
Values:
Configuration File Parameter Guide
M100 KLE Administrator and Provisioning Manual
provisioning.remote_check_sync_enable
Enables or disables remotely triggering the device to check for new firmware
and/or configuration files. The file checking is triggered remotely via a SIP
Notify message from the server containing the check-sync event.
0 (disabled), 1 (enabled)
provisioning.crypto_enable
Enables or disables encryption check for the configuration file(s). Enable
if you have encrypted the configuration file(s) using AES encryption.
0 (disabled), 1 (enabled)
provisioning.crypto_passphrase
Sets the AES encryption passphrase for decrypting the configuration
file(s). Enter the key that was generated when you encrypted the file.
Text string
provisioning.check_trusted_certificate
Enables or disables accepting only a trusted TLS certificate for access to
the provisioning server.
0 (disabled), 1 (enabled)
provisioning.pnp_enable
Enables or disables the M100 KLE checking for the provisioning URL
using the Plug-and-Play Subscribe and Notify protocol.
0 (disabled), 1 (enabled)
provisioning.pnp_response_timeout
Sets how long the M100 KLE repeats the SUBSCRIBE request if there is
no reply from the PnP server.
1–60
147
Default: 1
Default: 0
Default: Blank
Default: 0
Default: 1
Default: 10
Back to Contents