Basic Network Settings - Snom M100 KLE Administrator And Provisioning Manual

Basic Network Settings

You must be familiar with TCP/IP principles and protocols to configure static IP
settings.
Basic Network Settings
Click the link for each setting to see the matching configuration file parameter in
Module: Network Settings" on page
IPv4
Setting
Disable
DHCP
Using the WebUI
M100 KLE Administrator and Provisioning Manual
140. Default values and ranges are listed there.
Description
Disables all related IPv4 settings.
DHCP is selected (enabled) by default, which means the
M100 KLE will get its IP address, Subnet Mask, Gateway,
and DNS Server(s) from the network. When DHCP is
disabled, you must enter a static IP address for the M100
KLE, as well as addresses for the Subnet Mask, Gateway,
and DNS Server(s).
69
""network"
Back to Contents