User Preferences; General User Settings; Handset Settings; Account Assignments - Snom M100 KLE Administrator And Provisioning Manual

User Preferences

On the User Preferences page, you can set the language that appears on the WebUI. The
User Preferences page is also available to phone users when they log on to the WebUI.
The preference settings are also available as parameters in the configuration file.
See
""user_pref" Module: User Preference Settings" on page

General User Settings

Click the link for each setting to see the matching configuration file parameter in
"Configuration File Parameter Guide" on page
there.
Setting
WebUI Language

Handset Settings

The Handset Settings allow you to configure account assignments and names for the
cordless handsets that are registered to the base station. For more information on
registering cordless handsets, see the M100 KLE/M10 KLE User Guide.
The network settings are also available as parameters in the configuration file. See
""hs_settings" Module: Handset Settings" on page

Account Assignments

The Account Assignments table lists the maximum of 10 handsets, even if there are
fewer handsets registered. The registration status of currently registered handsets does not
affect what is listed on this table.
The table always displays the maximum eight accounts, even if there are fewer SIP
accounts enabled.
Using the WebUI
M100 KLE Administrator and Provisioning Manual
117. Default values and ranges are listed
Description
Sets the language that appears on the WebUI.
133.
55
163.
Back to Contents