Web Server; Trusted Servers - Snom M100 KLE Administrator And Provisioning Manual

Web Server

Setting
HTTP Server port
Enable Secure Browsing
HTTPS Server port
To configure Web Server Settings:
1. Enter the HTTP Server port number. The default setting is 80.
2. Enable or Disable Secure Browsing. When enabled, the HTTPS protocol is used, and
you must select the HTTPS server port in the next step.
3. Enter the HTTPS server port number. The default setting is 443.
Changing the Web Server settings will reboot the M100 KLE.

Trusted Servers

The Trusted Servers setting provides a means of blocking unauthorised SIP traffic. When
enabled, each account's Registration server, SIP server, Outbound Proxy server and
Backup Outbound Proxy server will be used as sources for trusted SIP traffic. All unsolicited
SIP traffic (for example, INVITE, NOTIFY, unsolicited MWI, OPTIONS) will be blocked
unless it is from one of the trusted servers with the enabled accounts.
If additional trusted sources are required beyond what has been specified with the enabled
accounts (for example, if IP dialling or other types of server traffic need to be secured), use
the Trusted IP settings on the Security page.
Setting
Accept SIP account
servers only
Using the WebUI
M100 KLE Administrator and Provisioning Manual
Description
Port used by the HTTP server.
Sets the server to use the HTTPS protocol.
Port used by the HTTPS server.
Description
Enable or disable using the account servers as sources for
trusted SIP traffic.
102
Back to Contents