Provisioning" Module: Provisioning Settings; General Configuration File Settings - Snom M100 KLE Administrator And Provisioning Manual

"provisioning" Module: Provisioning Settings

The provisioning settings follow the format: provisioning.[element].
All these settings are exported when you manually export the configuration from the M100
KLE.

General configuration file settings

Setting:
Description:
Values:
Setting:
Description:
Values:
Setting:
Description:
Values:
Setting:
Description:
Values:
Setting:
Description:
Values:
Configuration File Parameter Guide
M100 KLE Administrator and Provisioning Manual
provisioning.dhcp_option_enable
Enables or disables using DHCP options for locating the configuration
and firmware files.
0 (disabled), 1 (enabled)
provisioning.dhcp_option_priority_1
Sets the first priority DHCP option for the provisioning/firmware file
check.
66, 159, 160
provisioning.dhcp_option_priority_2
Sets the second priority DHCP option for the provisioning/firmware file
check.
66, 159, 160
provisioning.dhcp_option_priority_3
Sets the third priority DHCP option for the provisioning/firmware file
check.
66, 159, 160
provisioning.resync_mode
Sets the mode of the device's provisioning/firmware file check. This
determines which files the device retrieves when the resync process
begins.
config_only, firmware_only,
config_and_firmware
145
Default: 1
Default: 66
Default: 159
Default: 160
Default: config_and_firmware
Back to Contents