Using The Admin Settings Menu - Snom M100 KLE Administrator And Provisioning Manual

Using the Admin Settings Menu

To access the Admin Settings menu:
1. When the M10 KLE is idle, press MENU/SELECT.
The Main Menu appears.
2. Press
3. Use the dial pad to enter the admin password, and then press
password is admin (press the * key to enable entering lower-case letters).
The Admin settings are listed in Table 4.
Table 4. Admin setting summary
Setting
Network setting
Security
Provisioning
Edit PIN code
Firmware update
Configuration Using the Phone Menus
 
to highlight Admin settings, and then press MENU/SELECT.
or
Options
DHCP (Enable, Disable)
Set static IP
VLAN ID
Others
Secure Browsing
Server string
Login ID
Login PW
Edit PIN
Select Firmware update to have the handset check
whether a firmware update is available. See
Cordless Handset/Deskset" on page
M100 KLE Administrator and Provisioning Manual
24
. The default
ENTER
"Updating a
92.
Back to Contents