Manual Time Settings - Snom M100 KLE Administrator And Provisioning Manual

Setting
Daylight Savings End:




Daylight Savings Offset
(minutes)
Use DHCP
(Option 2/100/101)

Manual Time Settings

If Enable Network Time is disabled or if the time server is not available, use Manual Time
Settings to set the current time.
Setting
Date
Time
Click
Using the WebUI
Description
If User-defined DST is enabled, set the end date and time
for daylight savings: Month, week, day, and hour.
Month
Week
Day
Hour
If User-defined DST is enabled, this specifies the daylight
savings adjustment (in minutes) to be applied when the
current time is between Daylight Savings Start and
Daylight Savings End.
If Enable Network Time is selected, select to use DHCP to
determine the time zone offset. Options 2, 100 and 101
determine time zone information.
Description
Select the current year, month, and day. Click the Date
field and select the date from the calendar that appears.
Sets the current hour, minute, and second. Click the Time
field, and enter the current time. You can also refresh the
page to update the manual time settings.
to start the M100 KLE using the manual time settings.
M100 KLE Administrator and Provisioning Manual
88
Back to Contents