Snom M100 KLE Administrator And Provisioning Manual page 125

Setting:
Description:
Values:
Setting:
Description:
Values:
Setting:
Description:
Values:
Setting:
Description:
Values:
Setting:
Description:
Values:
Setting:
Description:
Values:
Setting:
Description:
Values:
Configuration File Parameter Guide
M100 KLE Administrator and Provisioning Manual
sip_account.x.nat_traversal_stun_enable
Enables or disables STUN (Simple Traversal of UDP through NATs) for
account x. STUN enables clients, each behind a firewall, to establish
calls via a service provider hosted outside of either local network.
0 (disabled), 1 (enabled)
sip_account.x.nat_traversal_stun_server_address
Sets the STUN server IP address.
IPv4, IPv6 or FQDN
sip_account.x.nat_traversal_stun_server_port
Sets the STUN server port.
1–65535
sip_account.x.nat_traversal_stun_keep_alive_enable
Enables or disables UDP keep-alives. Keep-alive packets are used to
maintain connections established through NAT.
0 (disabled), 1 (enabled)
sip_account.x.nat_traversal_stun_keep_alive_interval
Sets the interval (in seconds) for sending UDP keep-alives.
0–65535
sip_account.x.keep_alive_enable
Enable SIP keep alive for NAT traversal and monitoring SIP server
status.
0 (disabled), 1 (enabled)
sip_account.x.keep_alive_interval
Sets the interval (in seconds) for sending keep-alives.
1-3600
125
Default: 0
Default: Blank
Default: 3478
Default: 1
Default: 30
Default: 0
Default: 15
Back to Contents