User_Pref" Module: User Preference Settings - Snom M100 KLE Administrator And Provisioning Manual

"user_pref" Module: User Preference Settings

The user settings are accessible to the M100 KLE user. These settings are useful for initial
setup. You may wish to remove these settings from auto-provisioning update files so that
users do not have their own settings overwritten.
The user preference settings follow the format: user_pref.[element].
The user preference setting is included in the general configuration file.
Setting:
Description:
Values:
Setting:
Description:
Values:
Setting:
Description:
Values:
Setting:
Description:
Values:
Configuration File Parameter Guide
M100 KLE Administrator and Provisioning Manual
user_pref.web_language
Sets the language that appears on the WebUI.
en, fr, es
user_pref.call_terminated.busy_tone_enable
Enables the M100 KLE to play a busy tone when the far-end party ends
the
call, or when a network error condition (keep-alive failure) occurs.
0 (disabled), 1 (enabled)
user_pref.account.x.diversion_display
Enables or disables the display of diversion <name-addr> info
(if available) for calls forwarded to account x.
0 (disabled), 1 (enabled)
user_pref.feature_access_code_on_sip_registered_enable
Enables or disables Feature Access Code (FAC) call sending out after
registration succeeded. If enabled, then allow FAC call to be sent only if
user changes corresponding status locally.
0 (disabled), 1 (enabled)
163
Default: en
Default: 0
Default: 1
Default: 0
Back to Contents