Repeater Mode - Snom M100 KLE Administrator And Provisioning Manual

M100 KLE Administrator and Provisioning Manual
hs_settings.x.pfk.line1.account = 1
hs_settings.x.pfk.line1.feature = keyline
hs_settings.x.pfk.line1.value = 1
hs_settings.x.pfk.line2.account = 1
hs_settings.x.pfk.line2.feature = keyline
hs_settings.x.pfk.line2.value = 2
hs_settings.x.pfk.line3.account = 1
hs_settings.x.pfk.line3.feature = keyline
hs_settings.x.pfk.line3.value = 3
hs_settings.x.pfk.line4.account = 1
hs_settings.x.pfk.line4.feature = keyline
hs_settings.x.pfk.line4.value = 4
For more information about these parameters, see
""hs_settings" Module: Handset
Settings" on page 133.

Repeater Mode

On the Repeater Mode page, you can enable a repeater (such as the VSP605 Range
Extender) to be registered to the base station.
Using the WebUI 59
Back to Contents