Snom M100 KLE Administrator And Provisioning Manual page 45

Setting
Codec priority 4
Codec priority 5
Codec priority 6
Codec priority 7
Enable voice encryption
(SRTP)
Enable G.729 Annex B
Preferred Packetization
Time (ms)
DTMF Payload Type
Using the WebUI
M100 KLE Administrator and Provisioning Manual
Description
Select the codec to be used fourth during a call if the
previous codec fails.
Select the codec to be used fifth during a call if the previous
codec fails.
Select the codec to be used sixth during a call if the
previous codec fails.
Select the codec to be used seventh during a call if the
previous codec fails.
Select to enable secure RTP for voice packets.
When G.729a/b is enabled, select to enable G.729
Annex B, with voice activity detection (VAD) and
bandwidth-conserving silence suppression.
Select the packetization interval time.
Set the DTMF payload type for in-call DTMF from 96–127.
45
Back to Contents