Snom M100 KLE Administrator And Provisioning Manual page 143

Setting:
Description:
Values:
Setting:
Description:
Values:
Setting:
Description:
Values:
Setting:
Description:
Values:
Setting:
Description:
Values:
Setting:
Description:
Values:
Setting:
Description:
Values:
Configuration File Parameter Guide
M100 KLE Administrator and Provisioning Manual
network.ip.pppoe.service_name
If IPv4 mode is PPPoE, enter the name of the applicable PPPoE
provider, in case more than one is available.
Text string
network.ip.pppoe.username
If IPv4 mode is PPPoE, enter your PPPoE account username.
Text string
network.ip.pppoe.access_password
If IPv4 mode is PPPoE, enter your PPPoE account password.
Text string
network.ip6.mode
Set the IPv6 network mode, depending on how the device will be
assigned an IP address.
disable, auto, static
network.ip.static_ip6_addr
When IPv6 mode is static, enter the static IP address for the network.
Text string (IPv6)
network.ip6.prefix
When IPv6 mode is static, enter the IPv6 address prefix length.
0–128
network.ip6.gateway_addr
When IPv6 mode is static, enter the default gateway address.
Text string (IPv6)
143
Default: Blank
Default: Blank
Default: Blank
Default: disable
Default: Blank
Default: 64
Default: Blank
Back to Contents