Table of Contents
Advertisement
Setting:
Description:
Values:
Setting:
Description:
Values:
Setting:
Description:
Values:
Setting:
Description:
Values:
Configuration File Parameter Guide
M100 KLE Administrator and Provisioning Manual
sip_account.dirty_host_ttl
Specify the "Time to Live" (TTL) for dirty hosts in seconds. This means
that, when a phone was unable to reach a host, the phone will not try to
reach this host again until the time specified in this field has elapsed.
If this setting is 0 or empty, it has no effect (the host is set as "dirty" but
only for 0 seconds, which means it will have no effect on future requests)
0-7200
sip_account.dns_query_option
Select DNS query option for SIP traffic only:
0 (DNS query with A record only)
1 (DNS query with NAPTR/SRV/A)
DNS query for all other traffic (e.g. HTTP) should always perform
A record only.
0, 1
sip_account.shared_local_sip_port_enable
Allow the same SIP local port for multiple accounts.
If enabled, the SIP local port defined in parameter
sip_account.shared_local_sip_port will be used instead of the SIP
local ports defined for the accounts, parameter:
sip_account.x.local_sip_port.
0 (disabled), 1 (enabled)
sip_account.shared_local_sip_port
Defines the local SIP port to be used by all accounts, if enabled by
parameter sip_account.shared_local_sip_port_enable.
1-65535
128
Default:
0
Default:
1
Default:
0
Default:
5060
Back to Contents
Hide quick links:
Advertisement
Table of Contents
