Keyline Assignments - Snom M100 KLE Administrator And Provisioning Manual

KeyLine Assignments

On the KeyLine Assignments page, you can assign accounts to KeyLine numbers.
KeyLine assignments apply to all handsets and desksets registered to the M100 KLE SIP
DECT 4-Line Base Station.
The KeyLine number is displayed on the handset/deskset when you are on a call or
displaying calls in the Call List. The KeyLine number identifies the line number of a call.
Because a maximum of six active SIP sessions are supported across all handsets and
desksets, you should only configure a maximum of six KeyLine assignments.
The factory default is set to Account 1 for Keyline 1 to 6.
Setting
Keyline 1-12
To enable a Key System experience for your phone system, you must configure the line
keys (L1 to L4) for each handset and deskset. Such configuration is available via the
WebUI, phone user interface, or the configuration file parameters. Each of these methods
are described on the next page.
Using the WebUI
M100 KLE Administrator and Provisioning Manual
Description
Select the account you want to assign to the corresponding
KeyLine number.
Default values (1-6): Account 1, (7-12): N/A
57
Back to Contents