Provisioning - Snom M100 KLE Administrator And Provisioning Manual

Provisioning

Provisioning refers to the process of acquiring and applying new settings for the M100 KLE
using configuration files retrieved from a remote computer. After a M100 KLE is deployed,
subsequent provisioning can update the M100 KLE with new settings; for example, if your
service provider releases new features. See also
on page
With automatic provisioning, you enable the M100 KLE to get its settings
automatically—the process occurs in the background as part of routine system operation.
Automatic provisioning can apply to multiple devices simultaneously.
With manual provisioning on the WebUI, you update the M100 KLE settings (configuration
and/or firmware) yourself via SERVICING > Provisioning > Import Configuration
and/or SERVICING > Firmware Upgrade > Manual Upgrade. Manual provisioning can
only be performed on one M100 KLE at a time.
On the Provisioning page, you can enter settings that will enable the M100 KLE to receive
automatic configuration and firmware updates. The Provisioning page also allows you to
manually update M100 KLE configuration from a locally stored configuration file using an
Import function. You can also export the M100 KLE configuration—either to back it up or
apply the configuration to another M100 KLE in the future—to a file on your computer.
The provisioning process functions according to the Resynchronization settings and
Provisioning Server Settings. The M100 KLE checks for the provisioning URL from the
following sources in the order listed below:
1. PnP—Plug and Play Subscribe and Notify protocol
2. DHCP Options
3. Preconfigured URL—Any M100 KLE updated to the latest firmware release will have the
Redirection Server URL available as the default Provisioning Server URL (see
"provisioning.server_address" on page
Using the Redirection Service requires contacting the Snom support team for an
account.
If one of these sources is disabled, not available, or has not been configured, the M100 KLE
proceeds to the next source until reaching the end of the list.
The provisioning settings are also available as parameters in the configuration file. See
""provisioning" Module: Provisioning Settings" on page
Using the WebUI
109.
M100 KLE Administrator and Provisioning Manual
"Provisioning Using Configuration Files"
149).
145.
95
Back to Contents