Firmware Upgrade; Firmware Server Settings - Snom M100 KLE Administrator And Provisioning Manual

Firmware Upgrade

You can update the M100 KLE with new firmware using the following methods:
Retrieving a firmware update file from a remote host computer and accessed via a

URL. This central location may be arranged by you, an authorized dealer, or your
SIP service provider. Enter the URL under Firmware Server Settings.
Using a file located on your computer or local network. No connection to the Internet

is required. Consult your dealer for access to firmware update files. Click Manual
Upgrade to view the page where you can manually upgrade the M100 KLE
firmware.
The firmware upgrade settings are also available as parameters in the configuration file.
See
""provisioning" Module: Provisioning Settings" on page

Firmware Server Settings

Click the link for each setting to see the matching configuration file parameter in
""provisioning" Module: Provisioning Settings" on page
listed there.
Setting
Base Firmware URL
Handset Firmware URL
Installed Handset
Firmware
Using the WebUI
M100 KLE Administrator and Provisioning Manual
Description
The URL where the M100 KLE Base Station firmware
update file resides. This should be a full path, including the
filename of the firmware file.
The URL where the M10 KLE Cordless Handset firmware
update file resides. This should be a full path, including the
filename of the firmware file.
The version number of handset firmware currently
installed.
90
145.
145. Default values and ranges are
Back to Contents