M100 KLE Administrator and Provisioning Manual
Handset Name
On the Handset Name page, you can enter a name for each Handset. The Handset Name
will be used throughout the WebUI and will appear on the handset Idle screen.
The Handset Name is limited to a maximum of 11 characters.
The default name is "HANDSET". Blank name fields are not allowed. If you click
when any fields are empty, an error message appears.
Programmable Hard Keys
You can assign additional functions to the Line keys, Hard keys, and Soft keys that are
listed on the Programmable Hard Keys page. The functions that you assign to these keys
apply to each key in idle mode only.
The programmable hard key settings are also available as parameters in the configuration
file. See the parameters named hs_settings.x.pfk.____ in
""hs_settings" Module: Handset
Settings" on page
133.
Using the WebUI
61
Back to Contents