Install the Touchscreen Monitor
Thermo Scientific
Install the touchscreen monitor to save space in your lab and to take full advantage of
OMNIC Paradigm software for touchscreen for quickly executing workflows and carrying out
routine procedures.
Tools and Materials Needed
• Touchscreen monitor installation kit
• Touchscreen monitor, with mount
• New WiFi compartment cover with notch
• 9/64-inch hex driver
Time needed: 25 minutes or less
To install the touchscreen monitor
1. Prepare the spectrometer.
a. Press the power button to turn off the spectrometer and then unplug the power cord.
b. Turn off the purge, if applicable, and disconnect the purge line to the instrument and
any accessory.
c. Remove any accessory from the sample compartment.
Nicolet Summit User Guide
62