Thermo Scientific Nicolet Summit User Manual page 21

Next Steps
Thermo Scientific
6. Insert a sampling accessory
To install the optional Everest ATR accessory or iD1 Transmission accessory, grasp the
accessory by the front and rear handholds and lower the accessory onto the spectrometer.
Sampling accessories fit over two alignment pins on the spectrometer baseplate and are
held in place by strong magnets.
• For details on installing an accessory, see
• For details on using the Everest ATR accessory, see
Congratulations! Your instrument is ready for use. However, before you start collecting data,
back up your system and create a recovery drive to protect your system from potential
problems in the future. Windows 10 includes several built-in tools for backing up and
recovering your data.
For instructions on creating a recovery drive and system image and on restoring your system,
see "Back up and Recover Your Data."
Unpack and Get Started with the Spectrometer
Install a Sampling Accessory.
Sampling Accessories.
Nicolet Summit User Guide 17