Thermo Scientific Nicolet Summit User Manual page 70

Thermo Scientific
e. Lay the HDMI cable on top of the USB and power cables in the cable guides, and
tuck any excess cable in front of the touchscreen mount.
If you have a Summit PRO spectrometer, route the HDMI cable between two of the
vertical fins of the heat sink, as shown in Figure 7.
The HDMI cable should fit tightly along the side of the touchscreen mount. Excess
or loose cable can obstruct the compartment cover and prevent the cover from
closing.
Figure 10. The three cables fit in the cable guides along the back of the spectrometer
1. HDMI cable
2. Heat sink fins
Install the Touchscreen Monitor
Nicolet Summit User Guide 66