Thermo Scientific Nicolet Summit User Manual page 19

Thermo Scientific
2. Set up the monitor.
• If you have the attached touchscreen monitor, grasp the monitor by the sides and
position it to face the front of the instrument.
• If you are using an external monitor, connect the monitor to the spectrometer using
the Mini DisplayPort. If you are also using the optional wireless mouse and keyboard,
use the provided USB extension cable to position the wireless receiver farther from
the USB inputs.
Note Some USB and Mini DisplayPort devices are known to interfere with the
signal from wireless USB devices, such as wireless keyboards and mice. If you
notice performance issues with your wireless keyboard and mouse, such as lag or
delayed or missed input, use the provided USB extension cable to position the
wireless USB receiver farther from the USB ports.
3. (Optional) Replace the sample compartment windows.
If you purchased the ZnSe windows option, replace the windows. For instructions on
replacing the windows, see
4. Turn on the spectrometer.
NOTICE You must create a new password the first time you power on the
spectrometer. If this password is lost or forgotten, all data saved on the spectrometer
will be unrecoverable. It is recommended that you leave the password blank during
initial setup and later create a secure password and additional user accounts as needed.
a. Connect the power supply to the spectrometer and to a properly grounded AC power
source.
Replace the Sample Compartment
Unpack and Get Started with the Spectrometer
1. Ethernet port
2. Power input
3. Mini DisplayPort
4. USB ports (2)
5. Power button
6. WiFi adapter port
(under the top cover)
Windows.
Nicolet Summit User Guide 15