Installing Baseplate-Mounted Accessories - Thermo Scientific Nicolet Summit User Manual

Installing Baseplate-mounted Accessories

Thermo Scientific
The iD Base Adapter accommodates a wide variety of accessories for FTIR sampling,
including large transmission accessories and other specialized accessories.
Note Avoid installing the iD Base Adapter without an attached accessory. Very strong
magnets hold the adapter in place; you may need to use a tool to pry it free.
For slide-mounted accessories that are too big for the iD1 Transmission Accessory, a slide
mount that fits the iD base is available.
The iD Base Adapter has two sets of screw holes so the slide mount can be installed facing
either direction. To install the slide mount, position it over the screw holes, and then insert
and tighten the two washers and screws.
Install a Sampling Accessory
Nicolet Summit User Guide 28