To Create A System Image - Thermo Scientific Nicolet Summit User Manual

Thermo Scientific


To create a system image

1. Connect your SSD to one of the spectrometer's USB ports.
2. In Windows 10, open the Control Panel and select Backup and Restore (Windows 7).
3. In the left panel, select Create a system image.
4. Select On a hard disk and select your SSD from the list. Click Next.
5. Confirm the backup settings and click Start backup.
6. When asked "Do you want to create a system repair disc," click No.
7. Click Close and safely remove the SSD from the Summit. Label the drive as Summit
Recovery and store it in safe place.
Back up and Recover Your Data
Nicolet Summit User Guide 20