Restore Your System; To Restore Your System Using The Recovery Drive And System Image - Thermo Scientific Nicolet Summit User Manual

Restore Your System

Thermo Scientific
In case of operating system failure, use your recovery drive and system image to restore your
system.
Required materials
• USB recovery drive
• SSD with your system image


To restore your system using the recovery drive and system image

1. Turn off the Summit spectrometer.
2. Connect an external keyboard to one of the Summit spectrometer's USB ports.
3. Connect the USB recovery drive to one of the USB ports.
4. Turn the system on.
5. When the screen shows the Thermo Scientific splash screen, tap "Esc" on the keyboard
several times to open the system BIOS.
If a popup dialog shows "Quit Without Saving?" use the arrow keys to select No.
6. Using the arrow keys, navigate to the Save & Exit tab.
7. Navigate to the Boot Override section and select your recovery flash drive. Hit Enter to
boot to the recovery image.
8. When the "Choose your keyboard layout" screen appears, remove the recovery flash drive
from the USB port and insert the system image SSD.
9. Select your preferred keyboard layout.
10. In the Choose an Option screen, select Troubleshoot.
Back up and Recover Your Data
Nicolet Summit User Guide 21