The Billing > Billing Profile Screen - ZyXEL Communications ZyWall 110 User Manual

Table 178 Configuration > Hotspot > Billing > General (continued)
LABEL
Hotspot Service
Status
Service Status
Service Type
Expiration
Date
Apply
Reset
21.4 The Billing > Billing Profile Screen
Use this screen to configure the billing profiles that defines the maximum Internet access time and
charge per time unit. Click Configuration > Hotspot > Billing > Billing Profile to open the following screen.
Figure 373 Configuration > Hotspot > Billing > Billing Profile
The following table describes the labels in this screen.
Table 179 Configuration > Hotspot > Billing > Billing Profile
LABEL
Account
Generator
Settings
Button A ~ C
Chapter 21 Hotspot
DESCRIPTION
This field displays whether a service license is enabled at myZyxel (Activated) or not (Not
Activated) or expired (Expired). It displays the remaining Grace Period if your license has
Expired. It displays Not Licensed if there isn't a license to be activated for this service.
If you need a license or a trial license has expired, click Buy to buy a new one. If a Standard
license has expired, click Renew to extend the license.
Then, click Activate to connect with the myZyxel server to activate the new license.
This shows whether you have a trial or standard license or none (Trial, Standard, None).
This shows when your hotspot license will expire.
Click this button to save your changes to the Zyxel Device.
Click this button to return the screen to its last-saved settings.
DESCRIPTION
Select a billing profile for each button of the web-based account generator. The buttons
correspond to the buttons on a connected statement printer.
ZyWALL USG Series User's Guide
525