ZyXEL Communications ZyWall 110 User Manual page 688

Chapter 35 BWM (Bandwidth Management)
Figure 491 Configuration > BWM > Create New Object > Add Address
The following table describes the fields in the above screen.
Table 248 Configuration > BWM > Create New Object > Add Address
LABEL
Name
Address Type
IP Address
OK
Cancel
DESCRIPTION
Enter a name for the Address object of the rule.
Select an Address Type from the drop down menu on the right. The Address Types
are Host, Range, Subnet, Interface IP, Interface Subnet, and Interface Gateway.
Enter an IP address for the Address object.
Click OK to save the setting.
Click Cancel to abandon the setting.
ZyWALL USG Series User's Guide
688