ZyXEL Communications ZyWall 110 User Manual page 762

Figure 524 Configuration > UTM Profile > Anti-Spam > Black/White List > White List
The following table describes the labels in this screen.
Table 280 Configuration > UTM Profile > Anti-Spam > Black/White List > White List
LABEL DESCRIPTION
General Settings
Enable White List Select this check box to have the Zyxel Device forward e-mail that matches (an active)
Checking white list entry without doing any more anti-spam checking on that individual e-mail.
White List X-Header Specify the name and value for the X-Header to be added to e-mails that match the
Zyxel Device's spam white list.
Rule Summary
Add Click this to create a new entry. See
Edit Select an entry and click this to be able to modify it. See
details.
Remove Select an entry and click this to delete it.
Activate To turn on an entry, select it and click Activate.
Inactivate To turn off an entry, select it and click Inactivate.
Status The activate (light bulb) icon is lit when the entry is active and dimmed when the entry is
inactive.
# This is the entry's index number in the list.
Type This field displays whether the entry is based on the e-mail's subject, source or relay IP
address, source e-mail address, or a header.
Content This field displays the subject content, source or relay IP address, source e-mail address, or
header value for which the entry checks.
Apply Click Apply to save your changes back to the Zyxel Device.
Reset Click Reset to return the screen to its last-saved settings.
Chapter 40 Anti-Spam
ZyWALL USG Series User's Guide
762
Section 40.5.1 on page 760
Section 40.5.1 on page 760
for details.
for