Initial Setup Wizard - Port Forwarding - ZyXEL Communications ZyWall 110 User Manual

Chapter 4 Easy Mode

4.4 Initial Setup Wizard - Port Forwarding

Figure 77 Initial Setup Wizard Port Forwarding
NAT port forwarding allows the Zyxel Device to direct incoming traffic from the Internet to the correct
virtual server in your network. For example, if you have a NAS server in your network that you or other
people need access to from outside your network, select the IP address of the NAS from Client. Then,
select the service(s) that your NAS provides (for example FTP, HTTP, HTTPS) from the Available box and
use the right arrow to move each service to the Member box.
Even though the NAS is in your local network receiving the protection of the Zyxel Device, you can still
access that NAS using these services from anywhere outside your network.
Run the main Port Forwarding Wizard if you cannot see service you need in the list. In that wizard you
can define other services.
ZyWALL USG Series User's Guide
101