The Ssl Access Privilege Screen - ZyXEL Communications ZyWall 110 User Manual

SSL Access Policy Objects
The SSL access policies reference the following objects. If you update this information, in response to
changes, the Zyxel Device automatically propagates the changes through the SSL policies that use the
object(s). When you delete an SSL policy, the objects are not removed.
Table 229 Objects
OBJECT TYPE
User Accounts
Application
IP Pool
Server
Addresses
VPN Network
You cannot delete an object that is referenced by an SSL access policy. To delete the object, you must
first unassociate the object from the SSL access policy.

31.2 The SSL Access Privilege Screen

Click VPN > SSL VPN to open the Access Privilege screen. This screen lists the configured SSL access
policies.
Click on the icons to go to the OneSecurity website where there is guidance on configuration
walkthroughs, troubleshooting and other information.
Figure 446 VPN > SSL VPN > Access Privilege
Chapter 31 SSL VPN
OBJECT
DESCRIPTION
SCREEN
User Account/ Configure a user account or user group to which you want to apply this SSL
User Group access policy.
SSL Configure an SSL application object to specify the type of application and the
Application address of the local computer, server, or web site SSL users are to be able to
access.
Address Configure an address object that defines a range of private IP addresses to
assign to user computers so they can access the internal network through a
VPN connection.
Address Configure address objects for the IP addresses of the DNS and WINS servers that
the Zyxel Device sends to the VPN connection users.
Address Configure an address object to specify which network segment users are
allowed to access through a VPN connection.
ZyWALL USG Series User's Guide
642