ZyXEL Communications ZyWall 110 User Manual page 39

Table 3 Title Bar: Web Configurator Icons (continued)
LABEL DESCRIPTION
Site Map Click this to see an overview of links to the Web Configurator screens.
Forum Go to https://businessforum.zyxel.com for product discussions.
Help Click this to open the help page for the current screen.
About Click this to display basic information about the Zyxel Device.
Easy Mode Click this to go to a mode that contains wizards that help you configure the Zyxel Device, and
links to portals. Not all models have this mode.
Logout Click this to log out of the Web Configurator.
CLI Messages
Click CLI to look at the CLI commands sent by the Web Configurator. Open the pop-up window and
then click some menus in the web configurator to display the corresponding commands.
Figure 11 CLI Messages
Reference
Click Reference to open the Reference screen. Select the type of object and the individual object and
click Refresh to show which configuration settings reference the object.
Figure 12 Reference
The fields vary with the type of object. This table describes labels that can appear in this screen.
Table 4 References
LABEL DESCRIPTION
Type Select the type of reference from the drop-down list box.
Name Select the specific reference for the type selected. The settings then display in the table below.
# This field is a sequential value, and it is not associated with any entry.
Chapter 1 Introduction
ZyWALL USG Series User's Guide
39