ZyXEL Communications ZyWall 110 User Manual page 719

The following table describes the fields in this screen.
Table 260 Configuration > UTM Profile> IDP > Profile > Add > Group View
LABEL DESCRIPTION
Name This is the name of the profile. You may use 1-31 alphanumeric characters, underscores(
dashes (-), but the first character cannot be a number. This value is case-sensitive. These are
valid, unique profile names:
• MyProfile
• mYProfile
• Mymy12_3-4
These are invalid profile names:
• 1mYProfile
• My Profile
• MyProfile?
• Whatalongprofilename123456789012
Description Enter additional information about this IDP rule. You can enter up to 60 characters ("0-9", "a-z",
"A-Z", "-" and "_").
Switch to query Click this button to go to a screen where you can search for signatures by criteria such as
view name, ID, severity, attack type, vulnerable attack platforms, service category, log options or
actions.
Severity Level Select a severity level and these use the icons to enable/disable and configure logs and
actions for all signatures of that level.
Signature
Group
Activate To turn on an entry, select it and click Activate.
Inactivate To turn off an entry, select it and click Inactivate.
Log To edit an item's log option, select it and use the Log icon. These are the log options:
no: Select this option on an individual signature or a complete service group to have the Zyxel
Device create no log when a packet matches a signature(s).
log: Select this option on an individual signature or a complete service group to have the Zyxel
Device create a log when a packet matches a signature(s).
log alert: An alert is an e-mailed log for more serious events that may need more immediate
attention. They also appear in red in the Monitor > Log screen. Select this option to have the
Zyxel Device send an alert when a packet matches a signature(s).
Chapter 38 IDP
ZyWALL USG Series User's Guide
719
), or
_