ZyXEL Communications ZyWall 110 User Manual page 856

Figure 593 Configuration > Object > Schedule
The following table describes the labels in this screen. See
43.9.2.2 on page 857
Table 334 Configuration > Object > Schedule
LABEL
One Time
Add
Edit
Remove
References
#
Name
Start Day /
Time
Stop Day /
Time
Reference
Recurring
Add
Edit
Remove
References
#
Name
Start Time
Stop Time
Reference
43.9.2.1 The One-Time Schedule Add/Edit Screen
The One-Time Schedule Add/Edit screen allows you to define a one-time schedule or edit an existing
one. To access this screen, go to the Schedule screen (see
the Add icon or an Edit icon in the One Time section.
Chapter 43 Object
for more information as well.
DESCRIPTION
Click this to create a new entry.
Double-click an entry or select it and click Edit to be able to modify the entry's settings.
To remove an entry, select it and click Remove. The Zyxel Device confirms you want to remove
it before doing so.
Select an entry and click References to open a screen that shows which settings use the entry.
This field is a sequential value, and it is not associated with a specific schedule.
This field displays the name of the schedule, which is used to refer to the schedule.
This field displays the date and time at which the schedule begins.
This field displays the date and time at which the schedule ends.
This displays the number of times an object reference is used in a profile.
Click this to create a new entry.
Double-click an entry or select it and click Edit to be able to modify the entry's settings.
To remove an entry, select it and click Remove. The Zyxel Device confirms you want to remove
it before doing so.
Select an entry and click References to open a screen that shows which settings use the entry.
This field is a sequential value, and it is not associated with a specific schedule.
This field displays the name of the schedule, which is used to refer to the schedule.
This field displays the time at which the schedule begins.
This field displays the time at which the schedule ends.
This displays the number of times an object reference is used in a profile.
ZyWALL USG Series User's Guide
Section 43.9.2.1 on page 856
Section 43.9.2 on page
856
and Section
855), and click either