Table 112 Configuration > Network > Interface > PPP (continued)
LABEL
Account Profile
Apply
Reset
10.6.2 PPP Interface Add or Edit
Note: You have to set up an ISP account before you create a PPPoE/PPTP/
This screen lets you configure a PPPoE or PPTP or L2TP interface. If you enabled IPv6 in the Configuration
> System > IPv6 screen, you can also configure PPP interfaces used for your IPv6 networks on this screen.
To access this screen, click the Add icon or an Edit icon in the PPP Interface screen.
Chapter 10 Interfaces
DESCRIPTION
This field displays the ISP account used by this PPPoE/PPTP interface.
Click Apply to save your changes back to the Zyxel Device.
Click Reset to return the screen to its last-saved settings.
ZyWALL USG Series User's Guide
333
interface.
L2TP