Zymesh; Ssid Info - ZyXEL Communications ZyWall 110 User Manual

7.20 ZyMesh

Use this screen to view the ZyMesh traffic statistics between the managed APs. Click Monitor > Wireless
> ZyMesh to display this screen.
Figure 190 Monitor > Wireless > ZyMesh
The following table describes the labels in this screen.
Table 62 Monitor > Wireless > ZyMesh
LABEL
#
Description
IP Address
Channel ID
Hop
Uplink AP Info
SSID Name
Signal Strength
Link Up Time
MAC Address
Tx Power
Root AP
Tx Rate
Rx Rate

7.21 SSID Info

Use this screen to view the number of wireless clients currently connected to an SSID and the security
type used by the SSID. Click Monitor > Wireless > SSID Info to display this screen.
Chapter 7 Monitor
DESCRIPTION
This field displays the index number of the managed AP (in repeater mode) in this list.
This field displays the descriptive name of the managed AP (in repeater mode).
This field displays the IP address of the managed AP (in repeater mode).
This field displays the number of the channel used by the managed AP (in repeater
mode).
This is the hop count of the managed AP. For example, "1" means the managed AP
is connected to a root AP directly. "2" means there is another repeater AP between
the managed AP and the root AP.
This shows the role and descriptive name of the managed AP to which this
managed AP is connected wirelessly.
This indicates the name of the wireless network (SSID) the managed AP uses to
associated with another managed AP.
Before the slash, this shows the signal strength the uplink AP (a root AP or a repeater)
receives from this managed AP (in repeater mode).
After the slash, this shows the signal strength this managed AP (in repeater mode)
receives from the uplink AP.
This field displays the time the managed AP first associated with the root AP or
repeater.
This field displays the MAC address of the managed AP (in repeater mode).
This field displays the output power of the managed AP (in repeater mode).
This field displays the descriptive name of the root AP to which the managed AP is
connected wirelessly.
This field displays the maximum transmission rate of the root AP or repeater to which
the managed AP is connected.
This field displays the maximum reception rate of the root AP or repeater to which
the managed AP is connected.
ZyWALL USG Series User's Guide
234