Select Wan Type - ZyXEL Communications ZyWall 110 User Manual

Chapter 5 Quick Setup Wizards
Figure 118 Choose an Ethernet Interface

5.2.2 Select WAN Type

WAN Type Selection: Select the type of encapsulation this connection is to use. Choose Ethernet when
the WAN port is used as a regular Ethernet.
Otherwise, choose PPPoE, PPTP or L2TP for a dial-up connection according to the information from your
ISP.
Figure 119 WAN Interface Setup: Step 2
The screens vary depending on what encapsulation type you use. Refer to information provided by your
ISP to know what to enter in each field. Leave a field blank if you don't have that information.
Note: Enter the Internet access information exactly as your ISP gave it to you.
ZyWALL USG Series User's Guide
151