ZyXEL Communications ZyWall 110 User Manual page 494

Table 170 Configuration > Web Authentication > General (continued)
LABEL DESCRIPTION
Authentication This field displays the authentication requirement for users when their traffic matches this policy.
unnecessary - Users do not need to be authenticated.
required - Users need to be authenticated. They must manually go to the login screen or user
agreement page. The Zyxel Device will not redirect them to the login screen.
force - Users need to be authenticated. The Zyxel Device automatically displays the login
screen or user agreement page whenever it routes HTTP traffic for users who have not logged
in yet.
Authentication This field displays the name of the authentication type profile used in this policy to define how
Type users authenticate their sessions. It shows n/a if Authentication is set to unnecessary.
Description If the entry has a description configured, it displays here. This is n/a for the default policy.
Apply Click this button to save your changes to the Zyxel Device.
Reset Click this button to return the screen to its last-saved settings.
Creating Exceptional Services
This screen lists services that users can access without logging in. Click Add under Exceptional Services in
the previous screen to display this screen. You can change the list's membership here. Available
services appear on the left. Select any services you want users to be able to access without logging in
and click the right arrow button -> to add them. The member services are on the right. Select any
service that you want to remove from the member list, and click the left arrow <- button to remove
them. Then click OK to apply the changes and return to the main Web Authentication screen.
Alternatively, click Cancel to discard the changes and return to the main Web Authentication screen.
Figure 354 Configuration > Web Authentication > General > Add Exceptional Service
Creating/Editing an Authentication Policy
Open the Configuration > Web Authentication > General screen, then click the Add icon or select an
entry and click the Edit icon in the Web Authentication Policy Summary section to open the Auth. Policy
Add/Edit screen. Use this screen to configure an authentication policy.
Chapter 20 Web Authentication
ZyWALL USG Series User's Guide
494