Add/Edit White List Rule - ZyXEL Communications ZyWall 110 User Manual

Hide thumbs Also See for ZyWall 110:

Table of Contents

Figure 345 Configuration > Network > Layer 2 Isolation > White List

The following table describes the labels in this screen.

Table 165 Configuration > Network > Layer 2 Isolation > White List

Enable White List

18.3.1 Add/Edit White List Rule

This screen allows you to create a new rule in the white list or edit an existing one. To access this screen,

click the Add button or select an entry from the list and click the Edit button.

Note: You can configure up to 100 white list rules on the Zyxel Device.

Note: You need to know the IP address of each connected device that you want to allow to

be accessed by other devices when layer-2 isolation is enabled.

Chapter 18 Layer 2 Isolation

Select this option to turn on the white list on the Zyxel Device.

Note: You can enable this feature only when the security policy is enabled.

Click this to add a new rule.

Click this to edit the selected rule.

Click this to remove the selected rule.

To turn on an entry, select it and click Activate.

To turn off an entry, select it and click Inactivate.

This field is a sequential value, and it is not associated with a specific rule.

This icon is lit when the rule is active and dimmed when the rule is inactive.

This field displays the IP address of device that can be accessed by the devices connected to

an internal interface on which layer-2 isolation is enabled.

This field displays the description for the IP address in this rule.

Click Apply to save your changes back to the Zyxel Device.

Click Reset to return the screen to its last-saved settings.

ZyWALL USG Series User's Guide

Show Quick Links

Table of Contents